Harvest conifers
Organo-mineral fertilizer
Harvest conifers is an organo-mineral fertilizer for feeding decorative coniferous trees and shrubs: thuja, pine, spruce, fir, cypress, larch and others, with the aim of forming a powerful root system, stimulating the growth and development of plants, which provides an aesthetically attractive appearance of the landscape design
- Composition of the preparation:
- The composition of amino acids (35 g/l) and sugars of plant origin (9.5 mg/cm³). Complex of biologically active substances of bacterial origin: phytohormones (auxins - 1.5 g/l, cytokinins - 0.03 g/l), polysaccharides of producers (at least 1.2%).
- Packaging:
- Canister 1, 5, 20l.
- Expiration date:
- 24 months.
- Storage conditions:
- Store at t° from +5 to +25°С in a dry place protected from direct sunlight.
| N | P2O5 | K2O | MgO | SO3 | Mn | B | Cu | Fe | Mo | Zn |
|---|---|---|---|---|---|---|---|---|---|---|
| 125 | 125 | 20 | 12 | 60 | 7,5 | 4,5 | 1,6 | 5,6 | 0,2 | 2 |
| culture | term and method of processing | fertilizer rate, ml / 100m² (acre) | consumption of working solution, l / 100m² (acre) |
|---|---|---|---|
| Thuja, spruce, pine, juniper, fir | Spring feeding starting from the 2-3 year of growing | 50-100 | 5 liters of solution per tree |
| Periodic feeding in the period from April to the beginning of September with an interval of 15-20 days with watering | 20-40 | 5 liters of solution per tree | |
| Periodic spraying of needles in the period from April to the beginning of September with an interval of 10-15 days | 10-200 | 10 |
- Preparation of working solution
- Fertilizer is dissolved in non-hard water that does not contain chlorine with a temperature not lower than 10°C.
- Before adding the drug to water, it is recommended to shake it. The presence of a slight sediment is allowed, which is formed during long-term storage and dissolves when shaken or added to water. The sediment does not affect the quality and efficiency of the fertilizer.
- Fertilizer Harvest conifers is compatible with agrochemicals, biological preparations and growth stimulants. When preparing multi-component tank mixtures, it is recommended to carry out preliminary mixing to check the stability of the working solution
- The finished working solution must be used within 6 hours.
- Instructions for use
- Processing should be carried out in the morning or evening, or in cloudy weather, at an air temperature not higher than +25°C.
- Do not use in intense sunlight, gusty wind, rain, or heavy dew.